Woodworking is a delicate craft that requires precision. Not only the results are ingenious work of art, they could also be something useful. When you decide to pursue this either as a hobby or something you could do professionally to earn an income, you also have to learn about woodworking joints.
Woodworking joints are joining together wood to build defined products such as furniture. The list below enumerates the various types of woodworking joints and their uses. Knowing which is which could help ensure that your work and your finished products are impeccable.
The easiest and most popular way to combine two pieces of wood is the butt joint. From the name itself, this process involves “butting” the woods together. Since this is the simplest form of wood joint, it is also the weakest, unless a form of reinforcement such as wood glue is applied to keep the two pieces together. This joint should only be used on pieces that do not require strength since even with the glue, this joint is not as firm as the others.
Dovetail Wood Joint
If you require something stronger dovetail joint is your best bet. This woodworking joint is preferred by many because of its ability to withstand “pulling apart” force and movement. This type of joint is usually used when making drawers. Glue is also enough to keep the pins interlocked and does not require the aid of mechanical fasteners. Craftsmen involved in woodworks and timber joinery brisbane recommend dovetail wood joint because of its tensile strength.
Based on how it is called, a finger joint is similar to fingers interlocking. A popular type of woodworking joint, two pieces of wood are joint together at right angles, like fitting two puzzle pieces together. Similar to other joints, the use of glue to reinforce the joints is recommended. Making this type of joint is also relatively easy especially if someone is adept in using a table saw.
Mortise And Tenon Joint
Like the Dovetail wood Joint, Mortise and Tenon is also a strong joint. The concept is two pieces of wood; one with a hole (mortise) and the end of the other (tenon) is inserted into the hole. The two pieces may be glued together, pinned or wedged. If the two pieces are crafted perfectly, the tenon would drill into the mortise.
Bridle joint is a variation of a mortise and tenon joint. Similar in concept, one is tenon and one is mortise but instead of a hole, it is more of slats that interlink. The bridle joints connect two pieces of wood by their end forming a corner. A mechanical fastener or pin is needed to enforce the joints.
There is not much difference when it comes to the purposes of woodworking joints. As long as they are able to connect two pieces of wood together, they are serving their purpose. However, what is important is how they would affect the overall look of the finished product and the stability of the connection